ADVME7510 - Advanet ADVME7510 CPU Board - AMCC PowerPC440GX Processor VMEBus CPU Board

ADVME7510 - Advanet ADVME7510 CPU Board - AMCC PowerPC440GX Processor VMEBus CPU...

Advanet ADVME7510 CPU Board - AMCC PowerPC440GX Processor VMEBus CPU Board Simple Type: CPU Board

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

4 on-board DMA controller channels and DMA transfer between main memory and PCI is enabled (on-board function of the CPU)- Equipped with 2 channel Gigabit Ethernet (CPU internal MAC + PHY, RJ-45×2)
512kB Boot ROM(FLASH Memory)
6U (double height), single slot width VME bus port
Can operate as a VME bus master or slave
Can use Compact Flash as the storage device (provied with socket; module is optional)
Equipped with a single 64bit/33MHz PMC slot, facilitating easy expansion of various functions
Equipped with an SO-DIMM socket (DDR333, maximum 512MB, module is optional)
In addition to a 32KB command/data L1-cache, on-chip SRAM (256kB) can be used as an L2 cache
Interface with the VME bus by the Advanet PCI-VME bridge, “NARUTO II”
Operates with a single 5V power supply from the VME bus
Provided with 256B serial EEPROM (nonvolatile memory)
The 512kB SRAM and real time clock are backed up with a lithium battery
The main memory is dual port memory that also enables access from the VME bus
The RS232C serial port is equipped with 4ch (internal CPU functions (2ch) + external UART (2ch), RJ-45×4)
VME bus CPU board with the on-board PowerPC440GX(667MHz) by AMCC

General

Board Size: 6U, single slot
Bus Interface: PCI-VME Bridge: [NARUTO II] (Advanet original)
Compliance: Compatible with 3.3V module (the module is an option)
CPU: PowerPC440GX 667MHz by AMCC L1 cache:32KB/32KB, L2 cache:256KB
Function: VME bus master/slave, system controller, interrupter, interrupt handler, system reset input/output
Memory: Main Memory:Maximum 512MB (module is optional) SO-DIMM compatible with DDR266-333 can be installed Boot ROM:512KB Flash Memory(accommodates Advanet T4th boot loader) Backup SRAM:512KB Serial EEPROM:256BSerial port×4ch (RJ-45) 10/100/1000BASE-T Ethernet ×2ch (RJ-45) PMC Slot×1 Battery backup RTC
Peripheral: Serial port×4ch (RJ-45) 10/100/1000BASE-T Ethernet ×2ch (RJ-45) PMC Slot×1 Battery backup RTC
Power Requirements: DC5.0V±5%
Supply Voltage: DC5.0V:3A(max. Does not include PMC)
VMEbus: Bus width: Complies with A32/A24/A16 D32/D16/D08(EO)Rev.C.3