ADVME 7509 - PowerPC750FX CPU Board

ADVME 7509 - PowerPC750FX CPU Board Simple Type: VME Boards

PowerPC750FX CPU Board Simple Type: VME Boards

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

2-ch 10/100Base-TX Ethernet
256 bytes serial EEPROM (non-volatile memory)
4-ch RS232C serial ports and 4-ch RJ-45 ports
512k bytes Boot ROM FLASH memory accommodating an Advanet T4th boot loader
512k bytes SRAM and real time clock, backed up with a lithium battery
8-ch DMA controller for high speed transfers between main memory and the internal PCI bus
A single 64-bit / 66MHz PMC slot
Can operate as either a VME master or slave
Interface with the VME bus sing Advanet’s “NARUTO II” PCI-VME bridge
Marvell’s Discovery I (GT-64260) system controller
Requires a single 5V power supply from the VME bus
Single-slot 6U VME PowerPC processor board
Socket for CompactFlash memory
Up to 512MB of dual-ported SDRAM (133.3MHz, EC/ECC) accessible from the VME bus
Utilizing IBM PowerPC750FX (600MHz) CPU with 32K bytes L1 cache & 512k bytes L2 cache

General

Board Size: 6U, single-slot width
CPU: IBM PowerPC750FX (600MHz ) L1 cache:32KB/32KB, L2 cache:512KB w/ parity
Memory: 256-512MB SDRAM (supports EC/ECC functions) 512KB Boot ROM Flash Memory (accommodating Advanet’s T4th boot loader) 512KB SRAM for backupo 256 Bytes Serial EEPROM CompactFlash socket supporting 3.3V modules
PCI bus: PCI-VME Bridge: [NARUTO II] (Advanet’s original)
Peripheral: 4ch Serial ports (using RJ-45 connector) 2ch 10/100Base-T Ethernet (RJ-45) Single 64-bit PMC sloto Battery backup RTC
Power Requirements: 5.0 VDC ±5%
Supply Voltage: 5.0VDC, 6.5A max. (Excluding PMC)
VMEbus: Bus width complies with A32/A24/A16 D32/D16/D08 (EO) Rev.C.3 Functions as master/slave, system controller, interrupter, interrupt handler, system reset, input/output